Honeycomb Materials were born for Aviatic applications in the beginning, and they have been widely acknowledged for their unique stiffness-to-weight-ratio. Our manufacturing facility has succeeded in bringing it into commercial application. It consists of an expanded 3003 alloy hexagonal aluminum honeycomb core in the middle, and a sheet of 3003 H24 aluminum bonded to each side with an Epoxy adhesive agent. This sandwich structure gives this product high strength and a super-flat surface. Aluminum honeycomb core has the advantage of Lightness, so it is very light in weight for transportation and installation. The traditional thermal pressing equipment, not only has low working efficiency, but most likely will cause the panel to deform or bend due to the sudden change of temperature when panels come out of the press. Our updated Automatic Composite Honeycomb Panel Production Lines produce the honeycomb panel with the following steps: Feed in → Low Temperature → Middle Temperature → High Temperature → Middle Temperature →Low Temperature → Cooling and Figuration → Product out This continuous and integrated production process is done in a completely sealed environment under high pressure. It efficiently avoids the problems before they occur. The honeycomb panel produced by this production process will never deform even if the application environment is damp or subjected to high temperature. Aluminium Honeycomb core panels are panels that can be used for a wide variety of applications. Aluminium Honeycombs possess an excellent strength to weight ratio, and is applicable almost anywhere where lightness and strength are required and its uses are therefore virtually unlimited.
